我想检查SD卡是否存在，并接收有关SD卡添加/删除的通知。

到目前为止，我已经使用过libudev，并且已经制作了一个小应用程序来监听SD卡事件。

下面列出了代码：

#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stddef.h>
#include <errno.h>
#include <sys/time.h> //debug -> remove me

#include <libudev.h>

#define ADD_FILTER "add"
#define REMOVE_FILTER "remove"
#define SUBSYSTEM_FILTER "block"
#define ATTR_FILTER "ID_MODEL"
#define SD_ATTR_VALUE "SD_MMC"
#define ATTR_ACTIVE_SD "ID_PART_TABLE_TYPE"

static bool isDeviceSD(struct udev_device *device);
static bool isDevPresent(struct udev *device);
static void print_device(struct udev_device *device, const char *source); //for debugging -> remove me
static bool s_bSD_present;

int main()
{
    struct udev *udev;
    struct udev_monitor *udev_monitor = NULL;
    fd_set readfds;
    s_bSD_present = false;

    udev = udev_new();
    if (udev == NULL)
    {
        printf("udev_new FAILED \n");
        return 1;
    }

    s_bSD_present = isDevPresent(udev);
    if(s_bSD_present)
    {
        printf("+++SD is plugged in \n");
    }
    else
    {
        printf("---SD is not plugged in \n");
    }

    udev_monitor = udev_monitor_new_from_netlink(udev, "udev");
    if (udev_monitor == NULL) {
        printf("udev_monitor_new_from_netlink FAILED \n");
        return 1;
    }

    //add some filters
    if( udev_monitor_filter_add_match_subsystem_devtype(udev_monitor, SUBSYSTEM_FILTER, NULL) < 0 )
    {
        printf("udev_monitor_filter_add_match_subsystem_devtype FAILED \n");
        return 1;
    }

    if (udev_monitor_enable_receiving(udev_monitor) < 0)
    {
        printf("udev_monitor_enable_receiving FAILED \n");
        return 1;
    }

    while (1) {
        printf("Polling for new data... \n");

        int fdcount = 0;

        FD_ZERO(&readfds);

        if (udev_monitor != NULL)
        {
            FD_SET(udev_monitor_get_fd(udev_monitor), &readfds);
        }

        fdcount = select(udev_monitor_get_fd(udev_monitor)+1, &readfds, NULL, NULL, NULL);
        if (fdcount < 0)
        {
            if (errno != EINTR)
                printf("Error receiving uevent message\n");
            continue;
        }

        if ((udev_monitor != NULL) && FD_ISSET(udev_monitor_get_fd(udev_monitor), &readfds))
        {
            struct udev_device *device;

            device = udev_monitor_receive_device(udev_monitor);
            if (device == NULL)
                continue;

            //check the action
            const char* szAction = udev_device_get_action(device);
            if( strcmp(szAction, ADD_FILTER) == 0)
            {
                if( !s_bSD_present && isDeviceSD(device) )
                {
                    s_bSD_present = true;
                    printf("+++SD has been plugged in \n");
                }
            }
            else if( strcmp(szAction, REMOVE_FILTER) == 0 )
            {
                if( s_bSD_present && isDeviceSD(device) )
                {
                    s_bSD_present = false;
                    printf("---SD has been removed \n");
                }
            }

            udev_device_unref(device);
        }
    }

    return 0;
}

static bool isDeviceSD(struct udev_device *device)
{
    bool retVal = false;
    struct udev_list_entry *list_entry = 0;
    struct udev_list_entry* model_entry = 0;
    struct udev_list_entry* active_sd_entry = 0;

    list_entry = udev_device_get_properties_list_entry(device);
    model_entry = udev_list_entry_get_by_name(list_entry, ATTR_FILTER);
    if( 0 != model_entry )
    {
        const char* szModelValue = udev_list_entry_get_value(model_entry);
        active_sd_entry = udev_list_entry_get_by_name(list_entry, ATTR_ACTIVE_SD);
        if(strcmp(szModelValue, SD_ATTR_VALUE) == 0 && active_sd_entry != 0)
        {
            printf("Device is SD \n");
            retVal = true;

            //print_device(device, "UDEV");
        }
    }
    return retVal;
}


static bool isDevPresent(struct udev *device)
{
    bool retVal = false;
    struct udev_enumerate *enumerate;
    struct udev_list_entry *devices, *dev_list_entry;

    enumerate = udev_enumerate_new(device);
    udev_enumerate_add_match_subsystem(enumerate, SUBSYSTEM_FILTER);
    udev_enumerate_scan_devices(enumerate);
    devices = udev_enumerate_get_list_entry(enumerate);

    udev_list_entry_foreach(dev_list_entry, devices)
    {
        struct udev_device *dev;
        const char* dev_path = udev_list_entry_get_name(dev_list_entry);
        dev = udev_device_new_from_syspath(device, dev_path);

        if( true == isDeviceSD(dev) )
        {
            retVal = true;
            udev_device_unref(dev);
            break;
        }

        udev_device_unref(dev);
    }
    udev_enumerate_unref(enumerate);

    return retVal;
}


static void print_device(struct udev_device *device, const char *source)
{
      struct timeval tv;
      struct timezone tz;

      gettimeofday(&tv, &tz);
      printf("%-6s[%llu.%06u] %-8s %s (%s)\n",
             source,
             (unsigned long long) tv.tv_sec, (unsigned int) tv.tv_usec,
             udev_device_get_action(device),
             udev_device_get_devpath(device),
             udev_device_get_subsystem(device));

            struct udev_list_entry *list_entry;

            udev_list_entry_foreach(list_entry, udev_device_get_properties_list_entry(device))
                  printf("%s=%s\n",
                         udev_list_entry_get_name(list_entry),
                         udev_list_entry_get_value(list_entry));
            printf("\n");

}

此代码将获取有关添加/删除SD卡的通知（以及SD的初始状态-已插入/未插入）。但是，它更像是一种黑客手段，并非在所有情况下都有效。

我目前使用ID_MODEL设备的属性，并检查它是否SD_MMC为-SD卡。我现在只需要这种类型的卡，就足够了。

插入SD卡后，将为子系统块发送以下事件：2个change事件，add每个分区1个事件。下面列出了事件属性：

<----- change event - subsystem block - disk type disk ----->

UDEV  [1339412734.522055] change   /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host11/target11:0:0/11:0:0:2/block/sdd (block)
UDEV_LOG=3
ACTION=change
DEVPATH=/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host11/target11:0:0/11:0:0:2/block/sdd
SUBSYSTEM=block
DEVNAME=/dev/sdd
DEVTYPE=disk
SEQNUM=3168
ID_VENDOR=Generic-
ID_VENDOR_ENC=Generic-
ID_VENDOR_ID=0bda
ID_MODEL=SD_MMC
ID_MODEL_ENC=SD\x2fMMC\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
ID_MODEL_ID=0151
ID_REVISION=1.00
ID_SERIAL=Generic-_SD_MMC_20060413092100000-0:2
ID_SERIAL_SHORT=20060413092100000
ID_TYPE=disk
ID_INSTANCE=0:2
ID_BUS=usb
ID_USB_INTERFACES=:080650:
ID_USB_INTERFACE_NUM=00
ID_USB_DRIVER=usb-storage
ID_PATH=pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:2
ID_PART_TABLE_TYPE=dos
UDISKS_PRESENTATION_NOPOLICY=0
UDISKS_PARTITION_TABLE=1
UDISKS_PARTITION_TABLE_SCHEME=mbr
UDISKS_PARTITION_TABLE_COUNT=2
MAJOR=8
MINOR=48
DEVLINKS=/dev/block/8:48 /dev/disk/by-id/usb-Generic-_SD_MMC_20060413092100000-0:2 /dev/disk/by-path/pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:2

<----- add event partition 1 - subsystem block - disk type partition ----->

UDEV  [1339412734.719107] add      /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host11/target11:0:0/11:0:0:2/block/sdd/sdd1 (block)
UDEV_LOG=3
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host11/target11:0:0/11:0:0:2/block/sdd/sdd1
SUBSYSTEM=block
DEVNAME=/dev/sdd1
DEVTYPE=partition
SEQNUM=3169
ID_VENDOR=Generic-
ID_VENDOR_ENC=Generic-
ID_VENDOR_ID=0bda
ID_MODEL=SD_MMC
ID_MODEL_ENC=SD\x2fMMC\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
ID_MODEL_ID=0151
ID_REVISION=1.00
ID_SERIAL=Generic-_SD_MMC_20060413092100000-0:2
ID_SERIAL_SHORT=20060413092100000
ID_TYPE=disk
ID_INSTANCE=0:2
ID_BUS=usb
ID_USB_INTERFACES=:080650:
ID_USB_INTERFACE_NUM=00
ID_USB_DRIVER=usb-storage
ID_PATH=pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:2
ID_PART_TABLE_TYPE=dos
ID_FS_UUID=6343c7b9-92a9-4d8f-bdd8-893f1190f294
ID_FS_UUID_ENC=6343c7b9-92a9-4d8f-bdd8-893f1190f294
ID_FS_VERSION=1.0
ID_FS_TYPE=ext2
ID_FS_USAGE=filesystem
UDISKS_PRESENTATION_NOPOLICY=0
UDISKS_PARTITION=1
UDISKS_PARTITION_SCHEME=mbr
UDISKS_PARTITION_NUMBER=1
UDISKS_PARTITION_TYPE=0x83
UDISKS_PARTITION_SIZE=1006919680
UDISKS_PARTITION_SLAVE=/sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host11/target11:0:0/11:0:0:2/block/sdd
UDISKS_PARTITION_OFFSET=11618304
UDISKS_PARTITION_ALIGNMENT_OFFSET=0
MAJOR=8
MINOR=49
DEVLINKS=/dev/block/8:49 /dev/disk/by-id/usb-Generic-_SD_MMC_20060413092100000-0:2-part1 /dev/disk/by-path/pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:2-part1 /dev/disk/by-uuid/6343c7b9-92a9-4d8f-bdd8-893f1190f294

<----- add event partition 2 - subsystem block - disk type partition ----->

UDEV  [1339412734.731338] add      /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host11/target11:0:0/11:0:0:2/block/sdd/sdd2 (block)
UDEV_LOG=3
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host11/target11:0:0/11:0:0:2/block/sdd/sdd2
SUBSYSTEM=block
DEVNAME=/dev/sdd2
DEVTYPE=partition
SEQNUM=3170
ID_VENDOR=Generic-
ID_VENDOR_ENC=Generic-
ID_VENDOR_ID=0bda
ID_MODEL=SD_MMC
ID_MODEL_ENC=SD\x2fMMC\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
ID_MODEL_ID=0151
ID_REVISION=1.00
ID_SERIAL=Generic-_SD_MMC_20060413092100000-0:2
ID_SERIAL_SHORT=20060413092100000
ID_TYPE=disk
ID_INSTANCE=0:2
ID_BUS=usb
ID_USB_INTERFACES=:080650:
ID_USB_INTERFACE_NUM=00
ID_USB_DRIVER=usb-storage
ID_PATH=pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:2
ID_PART_TABLE_TYPE=dos
UDISKS_PRESENTATION_NOPOLICY=0
UDISKS_PARTITION=1
UDISKS_PARTITION_SCHEME=mbr
UDISKS_PARTITION_NUMBER=2
UDISKS_PARTITION_TYPE=0xda
UDISKS_PARTITION_SIZE=11618304
UDISKS_PARTITION_FLAGS=boot
UDISKS_PARTITION_SLAVE=/sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host11/target11:0:0/11:0:0:2/block/sdd
UDISKS_PARTITION_OFFSET=1022410752
UDISKS_PARTITION_ALIGNMENT_OFFSET=0
MAJOR=8
MINOR=50
DEVLINKS=/dev/block/8:50 /dev/disk/by-id/usb-Generic-_SD_MMC_20060413092100000-0:2-part2 /dev/disk/by-path/pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:2-part2

从change事件中，我无法提取有关是否添加或删除设备的任何信息。我试图打开设备名称，\dev\sdd但是我没有权限，所以该选项属于…

现在，我只是检查分区（add/ remove）的action属性。

该程序的该版本非常适合具有分区的SD卡。如果没有分区，则仅change接收事件。

所以我的问题是 ：有什么方法可以检查是否已从change事件中添加/删除媒体？还是有其他方法检查设备是否可用（请记住分区问题）？

任何有关改进设备属性迭代或获取通知方法的建议都将受到欢迎。

PS，我不能使用libusb:)。