Java 类org.jfree.chart.Effect3D 实例源码

项目：parabuild-ci 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code> permitted).
 * 
 * @return The updated cursor value.
 */
public AxisState draw(Graphics2D g2, 
                      double cursor,
                      Rectangle2D plotArea, 
                      Rectangle2D dataArea, 
                      RectangleEdge edge,
                      PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the gridlines...
        List ticks = refreshTicks(g2, state, plotArea, dataArea, edge); 
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Effect3D e3D = (Effect3D) plot.getRenderer();
    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - e3D.getXOffset();
    double adjustedH = dataArea.getHeight() - e3D.getYOffset();

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += e3D.getYOffset();
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += e3D.getXOffset();
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX, adjustedY,
                                                          adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea, adjustedDataArea, edge);

    // draw the axis label...
    info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);

    return info;

}

项目：parabuild-ci 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn (<code>null</code> not
                    permitted).
 * @param dataArea  the area within which the plot is being drawn (<code>null</code> not 
 *                  permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code> permitted).
 * 
 * @return the axis state (never <code>null</code>).
 */
public AxisState draw(Graphics2D g2, 
                      double cursor,
                      Rectangle2D plotArea, 
                      Rectangle2D dataArea, 
                      RectangleEdge edge,
                      PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a bit of an
    // ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW, adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);   
    }

    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge, state, plotState);
    state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);

    return state;

}

项目：parabuild-ci 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 * 
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 * 
 * @return the coordinate.
 */
public double getCategoryJava2DCoordinate(CategoryAnchor anchor, 
                                          int category, 
                                          int categoryCount, 
                                          Rectangle2D area,
                                          RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(
            adjustedX, adjustedY, adjustedW, adjustedH
        );
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea, edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea, edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea, edge);
    }
    return result;

}

项目：parabuild-ci 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a 
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the 
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 * 
 * @return The updated cursor value.
 */
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea, 
        Rectangle2D dataArea, RectangleEdge edge, 
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the 
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge); 
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX, 
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea, 
            adjustedDataArea, edge);

    // draw the axis label...
    info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);

    return info;

}

项目：parabuild-ci 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a 
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn 
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn 
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 * 
 * @return The axis state (never <code>null</code>).
 */
public AxisState draw(Graphics2D g2, 
                      double cursor,
                      Rectangle2D plotArea, 
                      Rectangle2D dataArea, 
                      RectangleEdge edge,
                      PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a 
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW, 
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);   
    }

    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge, 
            state, plotState);
    state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);

    return state;

}

项目：parabuild-ci 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 * 
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 * 
 * @return The coordinate.
 */
public double getCategoryJava2DCoordinate(CategoryAnchor anchor, 
                                          int category, 
                                          int categoryCount, 
                                          Rectangle2D area,
                                          RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY, 
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea, 
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea, 
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea, 
                edge);
    }
    return result;

}

项目：ccu-historian 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The updated cursor value.
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge,
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge);
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
            adjustedDataArea, edge);

    if (getAttributedLabel() != null) {
        info = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, info);
    } else {
        info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
    }
    return info;

}

项目：ccu-historian 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The axis state (never <code>null</code>).
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge, 
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);
    }

    if (isAxisLineVisible()) {
        drawAxisLine(g2, cursor, adjustedDataArea, edge);
    }
    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    if (isTickMarksVisible()) {
        drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
    }
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
            state, plotState);
    if (getAttributedLabel() != null) {
        state = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, state);

    } else {
        state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);
    }
    return state;
}

项目：ccu-historian 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 *
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 *
 * @return The coordinate.
 */
@Override
public double getCategoryJava2DCoordinate(CategoryAnchor anchor, 
        int category, int categoryCount, Rectangle2D area, 
        RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea,
                edge);
    }
    return result;

}

项目：aya-lang 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The updated cursor value.
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge,
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge);
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
            adjustedDataArea, edge);

    if (getAttributedLabel() != null) {
        info = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, info);
    } else {
        info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
    }
    return info;

}

项目：aya-lang 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The axis state (never <code>null</code>).
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge, 
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);
    }

    if (isAxisLineVisible()) {
        drawAxisLine(g2, cursor, adjustedDataArea, edge);
    }
    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    if (isTickMarksVisible()) {
        drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
    }
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
            state, plotState);
    if (getAttributedLabel() != null) {
        state = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, state);

    } else {
        state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);
    }
    return state;
}

项目：aya-lang 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 *
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 *
 * @return The coordinate.
 */
@Override
public double getCategoryJava2DCoordinate(CategoryAnchor anchor, 
        int category, int categoryCount, Rectangle2D area, 
        RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea,
                edge);
    }
    return result;

}

项目：HTML5_WebSite 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The updated cursor value.
 */
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge,
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge);
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
            adjustedDataArea, edge);

    // draw the axis label...
    info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);

    return info;

}

项目：HTML5_WebSite 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The axis state (never <code>null</code>).
 */
public AxisState draw(Graphics2D g2,
                      double cursor,
                      Rectangle2D plotArea,
                      Rectangle2D dataArea,
                      RectangleEdge edge,
                      PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);
    }

    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
            state, plotState);
    state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);

    return state;

}

项目：HTML5_WebSite 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 *
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 *
 * @return The coordinate.
 */
public double getCategoryJava2DCoordinate(CategoryAnchor anchor,
                                          int category,
                                          int categoryCount,
                                          Rectangle2D area,
                                          RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea,
                edge);
    }
    return result;

}

项目：populus 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The updated cursor value.
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge,
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge);
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
            adjustedDataArea, edge);

    if (getAttributedLabel() != null) {
        info = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, info);
    } else {
        info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
    }
    return info;

}

项目：populus 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The axis state (never <code>null</code>).
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge, 
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);
    }

    if (isAxisLineVisible()) {
        drawAxisLine(g2, cursor, adjustedDataArea, edge);
    }
    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    if (isTickMarksVisible()) {
        drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
    }
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
            state, plotState);
    if (getAttributedLabel() != null) {
        state = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, state);

    } else {
        state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);
    }
    return state;
}

项目：populus 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 *
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 *
 * @return The coordinate.
 */
@Override
public double getCategoryJava2DCoordinate(CategoryAnchor anchor, 
        int category, int categoryCount, Rectangle2D area, 
        RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea,
                edge);
    }
    return result;

}

项目：PI 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The updated cursor value.
 */
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge,
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge);
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
            adjustedDataArea, edge);

    // draw the axis label...
    info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);

    return info;

}

项目：PI 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The axis state (never <code>null</code>).
 */
public AxisState draw(Graphics2D g2,
                      double cursor,
                      Rectangle2D plotArea,
                      Rectangle2D dataArea,
                      RectangleEdge edge,
                      PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);
    }

    if (isAxisLineVisible()) {
        drawAxisLine(g2, cursor, adjustedDataArea, edge);
    }
    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    if (isTickMarksVisible()) {
        drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
    }
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
            state, plotState);
    state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);

    return state;

}

项目：PI 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 *
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 *
 * @return The coordinate.
 */
public double getCategoryJava2DCoordinate(CategoryAnchor anchor,
                                          int category,
                                          int categoryCount,
                                          Rectangle2D area,
                                          RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea,
                edge);
    }
    return result;

}

项目：nabs 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a 
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the 
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 * 
 * @return The updated cursor value.
 */
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea, 
        Rectangle2D dataArea, RectangleEdge edge, 
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the 
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge); 
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX, 
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea, 
            adjustedDataArea, edge);

    // draw the axis label...
    info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);

    return info;

}

项目：nabs 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a 
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn 
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn 
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 * 
 * @return The axis state (never <code>null</code>).
 */
public AxisState draw(Graphics2D g2, 
                      double cursor,
                      Rectangle2D plotArea, 
                      Rectangle2D dataArea, 
                      RectangleEdge edge,
                      PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a 
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW, 
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);   
    }

    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge, 
            state, plotState);
    state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);

    return state;

}

项目：nabs 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 * 
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 * 
 * @return The coordinate.
 */
public double getCategoryJava2DCoordinate(CategoryAnchor anchor, 
                                          int category, 
                                          int categoryCount, 
                                          Rectangle2D area,
                                          RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY, 
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea, 
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea, 
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea, 
                edge);
    }
    return result;

}

项目：ECG-Viewer 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The updated cursor value.
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge,
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge);
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
            adjustedDataArea, edge);

    if (getAttributedLabel() != null) {
        info = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, info);
    } else {
        info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
    }
    return info;

}

项目：ECG-Viewer 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The axis state (never <code>null</code>).
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge, 
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);
    }

    if (isAxisLineVisible()) {
        drawAxisLine(g2, cursor, adjustedDataArea, edge);
    }
    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    if (isTickMarksVisible()) {
        drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
    }
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
            state, plotState);
    if (getAttributedLabel() != null) {
        state = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, state);

    } else {
        state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);
    }
    return state;
}

项目：ECG-Viewer 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 *
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 *
 * @return The coordinate.
 */
@Override
public double getCategoryJava2DCoordinate(CategoryAnchor anchor, 
        int category, int categoryCount, Rectangle2D area, 
        RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea,
                edge);
    }
    return result;

}

项目：astor 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The updated cursor value.
 */
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge,
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge);
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
            adjustedDataArea, edge, plotState);

    // draw the axis label...
    info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info,
            plotState);

    return info;

}

项目：astor 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The axis state (never <code>null</code>).
 */
public AxisState draw(Graphics2D g2,
                      double cursor,
                      Rectangle2D plotArea,
                      Rectangle2D dataArea,
                      RectangleEdge edge,
                      PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);
    }

    if (isAxisLineVisible()) {
        drawAxisLine(g2, cursor, adjustedDataArea, edge);
    }
    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    if (isTickMarksVisible()) {
        drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
    }
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
            state, plotState);
    state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state,
            plotState);

    return state;

}

项目：astor 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 *
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 *
 * @return The coordinate.
 */
public double getCategoryJava2DCoordinate(CategoryAnchor anchor,
                                          int category,
                                          int categoryCount,
                                          Rectangle2D area,
                                          RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea,
                edge);
    }
    return result;

}

项目：opensim-gui 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a 
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the 
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 * 
 * @return The updated cursor value.
 */
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea, 
        Rectangle2D dataArea, RectangleEdge edge, 
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the 
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge); 
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX, 
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea, 
            adjustedDataArea, edge);

    // draw the axis label...
    info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);

    return info;

}

项目：opensim-gui 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a 
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn 
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn 
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 * 
 * @return The axis state (never <code>null</code>).
 */
public AxisState draw(Graphics2D g2, 
                      double cursor,
                      Rectangle2D plotArea, 
                      Rectangle2D dataArea, 
                      RectangleEdge edge,
                      PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a 
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW, 
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);   
    }

    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge, 
            state, plotState);
    state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);

    return state;

}

项目：opensim-gui 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 * 
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 * 
 * @return The coordinate.
 */
public double getCategoryJava2DCoordinate(CategoryAnchor anchor, 
                                          int category, 
                                          int categoryCount, 
                                          Rectangle2D area,
                                          RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY, 
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea, 
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea, 
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea, 
                edge);
    }
    return result;

}

项目：group-five 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The updated cursor value.
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge,
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge);
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
            adjustedDataArea, edge);

    if (getAttributedLabel() != null) {
        info = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, info);
    } else {
        info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
    }
    return info;

}

项目：group-five 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The axis state (never <code>null</code>).
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge, 
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);
    }

    if (isAxisLineVisible()) {
        drawAxisLine(g2, cursor, adjustedDataArea, edge);
    }
    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    if (isTickMarksVisible()) {
        drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
    }
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
            state, plotState);
    if (getAttributedLabel() != null) {
        state = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, state);

    } else {
        state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);
    }
    return state;
}

项目：group-five 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 *
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 *
 * @return The coordinate.
 */
@Override
public double getCategoryJava2DCoordinate(CategoryAnchor anchor, 
        int category, int categoryCount, Rectangle2D area, 
        RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea,
                edge);
    }
    return result;

}

项目：manydesigns.cn 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The updated cursor value.
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge,
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge);
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
            adjustedDataArea, edge);

    if (getAttributedLabel() != null) {
        info = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, info);
    } else {
        info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
    }
    return info;

}

项目：manydesigns.cn 文件：CategoryAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device (<code>null</code> not permitted).
 * @param cursor  the cursor location.
 * @param plotArea  the area within which the axis should be drawn
 *                  (<code>null</code> not permitted).
 * @param dataArea  the area within which the plot is being drawn
 *                  (<code>null</code> not permitted).
 * @param edge  the location of the axis (<code>null</code> not permitted).
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The axis state (never <code>null</code>).
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge, 
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        return new AxisState(cursor);
    }

    // calculate the adjusted data area taking into account the 3D effect...
    // this assumes that there is a 3D renderer, all this 3D effect is a
    // bit of an ugly hack...
    CategoryPlot plot = (CategoryPlot) getPlot();

    Rectangle2D adjustedDataArea = new Rectangle2D.Double();
    if (plot.getRenderer() instanceof Effect3D) {
        Effect3D e3D = (Effect3D) plot.getRenderer();
        double adjustedX = dataArea.getMinX();
        double adjustedY = dataArea.getMinY();
        double adjustedW = dataArea.getWidth() - e3D.getXOffset();
        double adjustedH = dataArea.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedDataArea.setRect(adjustedX, adjustedY, adjustedW,
                adjustedH);
    }
    else {
        adjustedDataArea.setRect(dataArea);
    }

    if (isAxisLineVisible()) {
        drawAxisLine(g2, cursor, adjustedDataArea, edge);
    }
    // draw the category labels and axis label
    AxisState state = new AxisState(cursor);
    if (isTickMarksVisible()) {
        drawTickMarks(g2, cursor, adjustedDataArea, edge, state);
    }
    state = drawCategoryLabels(g2, plotArea, adjustedDataArea, edge,
            state, plotState);
    if (getAttributedLabel() != null) {
        state = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, state);

    } else {
        state = drawLabel(getLabel(), g2, plotArea, dataArea, edge, state);
    }
    return state;
}

项目：manydesigns.cn 文件：CategoryAxis3D.java

/**
 * Returns the Java 2D coordinate for a category.
 *
 * @param anchor  the anchor point.
 * @param category  the category index.
 * @param categoryCount  the category count.
 * @param area  the data area.
 * @param edge  the location of the axis.
 *
 * @return The coordinate.
 */
@Override
public double getCategoryJava2DCoordinate(CategoryAnchor anchor, 
        int category, int categoryCount, Rectangle2D area, 
        RectangleEdge edge) {

    double result = 0.0;
    Rectangle2D adjustedArea = area;
    CategoryPlot plot = (CategoryPlot) getPlot();
    CategoryItemRenderer renderer = plot.getRenderer();
    if (renderer instanceof Effect3D) {
        Effect3D e3D = (Effect3D) renderer;
        double adjustedX = area.getMinX();
        double adjustedY = area.getMinY();
        double adjustedW = area.getWidth() - e3D.getXOffset();
        double adjustedH = area.getHeight() - e3D.getYOffset();

        if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
            adjustedY += e3D.getYOffset();
        }
        else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
            adjustedX += e3D.getXOffset();
        }
        adjustedArea = new Rectangle2D.Double(adjustedX, adjustedY,
                adjustedW, adjustedH);
    }

    if (anchor == CategoryAnchor.START) {
        result = getCategoryStart(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.MIDDLE) {
        result = getCategoryMiddle(category, categoryCount, adjustedArea,
                edge);
    }
    else if (anchor == CategoryAnchor.END) {
        result = getCategoryEnd(category, categoryCount, adjustedArea,
                edge);
    }
    return result;

}

项目：buffer_bci 文件：NumberAxis3D.java

/**
 * Draws the axis on a Java 2D graphics device (such as the screen or a
 * printer).
 *
 * @param g2  the graphics device.
 * @param cursor  the cursor.
 * @param plotArea  the area for drawing the axes and data.
 * @param dataArea  the area for drawing the data (a subset of the
 *                  plotArea).
 * @param edge  the axis location.
 * @param plotState  collects information about the plot (<code>null</code>
 *                   permitted).
 *
 * @return The updated cursor value.
 */
@Override
public AxisState draw(Graphics2D g2, double cursor, Rectangle2D plotArea,
        Rectangle2D dataArea, RectangleEdge edge,
        PlotRenderingInfo plotState) {

    // if the axis is not visible, don't draw it...
    if (!isVisible()) {
        AxisState state = new AxisState(cursor);
        // even though the axis is not visible, we need ticks for the
        // gridlines...
        List ticks = refreshTicks(g2, state, dataArea, edge);
        state.setTicks(ticks);
        return state;
    }

    // calculate the adjusted data area taking into account the 3D effect...
    double xOffset = 0.0;
    double yOffset = 0.0;
    Plot plot = getPlot();
    if (plot instanceof CategoryPlot) {
        CategoryPlot cp = (CategoryPlot) plot;
        CategoryItemRenderer r = cp.getRenderer();
        if (r instanceof Effect3D) {
            Effect3D e3D = (Effect3D) r;
            xOffset = e3D.getXOffset();
            yOffset = e3D.getYOffset();
        }
    }

    double adjustedX = dataArea.getMinX();
    double adjustedY = dataArea.getMinY();
    double adjustedW = dataArea.getWidth() - xOffset;
    double adjustedH = dataArea.getHeight() - yOffset;

    if (edge == RectangleEdge.LEFT || edge == RectangleEdge.BOTTOM) {
        adjustedY += yOffset;
    }
    else if (edge == RectangleEdge.RIGHT || edge == RectangleEdge.TOP) {
        adjustedX += xOffset;
    }
    Rectangle2D adjustedDataArea = new Rectangle2D.Double(adjustedX,
            adjustedY, adjustedW, adjustedH);

    // draw the tick marks and labels...
    AxisState info = drawTickMarksAndLabels(g2, cursor, plotArea,
            adjustedDataArea, edge);

    if (getAttributedLabel() != null) {
        info = drawAttributedLabel(getAttributedLabel(), g2, plotArea, 
                dataArea, edge, info);
    } else {
        info = drawLabel(getLabel(), g2, plotArea, dataArea, edge, info);
    }
    return info;

}