1. 包列表
  2. 类列表
  3. org.projectfloodlight.openflow.protocol.instruction.OFInstructionWriteActions

Java 类org.projectfloodlight.openflow.protocol.instruction.OFInstructionWriteActions 实例源码

项目：athena    文件：FlowEntryBuilder.java    
private TrafficTreatment buildTreatment() {
    TrafficTreatment.Builder builder = DefaultTrafficTreatment.builder();
    for (OFInstruction in : instructions) {
        switch (in.getType()) {
            case GOTO_TABLE:
                builder.transition(((int) ((OFInstructionGotoTable) in)
                        .getTableId().getValue()));
                break;
            case WRITE_METADATA:
                OFInstructionWriteMetadata m = (OFInstructionWriteMetadata) in;
                builder.writeMetadata(m.getMetadata().getValue(),
                                      m.getMetadataMask().getValue());
                break;
            case WRITE_ACTIONS:
                builder.deferred();
                buildActions(((OFInstructionWriteActions) in).getActions(),
                             builder);
                break;
            case APPLY_ACTIONS:
                builder.immediate();
                buildActions(((OFInstructionApplyActions) in).getActions(),
                             builder);
                break;
            case CLEAR_ACTIONS:
                builder.wipeDeferred();
                break;
            case EXPERIMENTER:
                break;
            case METER:
                break;
            default:
                log.warn("Unknown instructions type {}", in.getType());
        }
    }

    return builder.build();
}
项目：fresco_floodlight    文件：InstructionUtils.java    
/**
 * Convert the string representation of an OFInstructionWriteActions to
 * an OFInstructionWriteActions. The instruction will be set within the
 * OFFlowMod.Builder provided. Notice nothing is returned, but the
 * side effect is the addition of an instruction in the OFFlowMod.Builder.
 * @param fmb; The FMB in which to append the new instruction
 * @param instStr; The string to parse the instruction from
 * @param log
 */
public static void writeActionsFromString(OFFlowMod.Builder fmb, String inst, Logger log) {

    if (fmb.getVersion().compareTo(OFVersion.OF_11) < 0) {
        log.error("Write Actions Instruction not supported in OpenFlow 1.0");
        return;
    }

    OFFlowMod.Builder tmpFmb = OFFactories.getFactory(fmb.getVersion()).buildFlowModify(); // ActionUtils.fromString() will use setActions(), which should not be used for OF1.3; use temp to avoid overwriting any applyActions data
    OFInstructionWriteActions.Builder ib = OFFactories.getFactory(fmb.getVersion()).instructions().buildWriteActions();
    ActionUtils.fromString(tmpFmb, inst, log);
    ib.setActions(tmpFmb.getActions());
    log.debug("Appending WriteActions instruction: {}", ib.build());
    appendInstruction(fmb, ib.build());
    log.debug("All instructions after append: {}", fmb.getInstructions());  }
项目：iTAP-controller    文件：InstructionUtils.java    
/**
 * Convert the string representation of an OFInstructionWriteActions to
 * an OFInstructionWriteActions. The instruction will be set within the
 * OFFlowMod.Builder provided. Notice nothing is returned, but the
 * side effect is the addition of an instruction in the OFFlowMod.Builder.
 * @param fmb; The FMB in which to append the new instruction
 * @param instStr; The string to parse the instruction from
 * @param log
 */
public static void writeActionsFromString(OFFlowMod.Builder fmb, String inst, Logger log) {

    if (fmb.getVersion().compareTo(OFVersion.OF_11) < 0) {
        log.error("Write Actions Instruction not supported in OpenFlow 1.0");
        return;
    }

    OFFlowMod.Builder tmpFmb = OFFactories.getFactory(fmb.getVersion()).buildFlowModify(); // ActionUtils.fromString() will use setActions(), which should not be used for OF1.3; use temp to avoid overwriting any applyActions data
    OFInstructionWriteActions.Builder ib = OFFactories.getFactory(fmb.getVersion()).instructions().buildWriteActions();
    ActionUtils.fromString(tmpFmb, inst, log);
    ib.setActions(tmpFmb.getActions());
    log.debug("Appending WriteActions instruction: {}", ib.build());
    appendInstruction(fmb, ib.build());
    log.debug("All instructions after append: {}", fmb.getInstructions());  }
项目：SDN-Multicast    文件：InstructionUtils.java    
/**
 * Convert the string representation of an OFInstructionWriteActions to
 * an OFInstructionWriteActions. The instruction will be set within the
 * OFFlowMod.Builder provided. Notice nothing is returned, but the
 * side effect is the addition of an instruction in the OFFlowMod.Builder.
 * @param fmb; The FMB in which to append the new instruction
 * @param instStr; The string to parse the instruction from
 * @param log
 */
public static void writeActionsFromString(OFFlowMod.Builder fmb, String inst, Logger log) {

    if (fmb.getVersion().compareTo(OFVersion.OF_11) < 0) {
        log.error("Write Actions Instruction not supported in OpenFlow 1.0");
        return;
    }

    OFFlowMod.Builder tmpFmb = OFFactories.getFactory(fmb.getVersion()).buildFlowModify(); // ActionUtils.fromString() will use setActions(), which should not be used for OF1.3; use temp to avoid overwriting any applyActions data
    OFInstructionWriteActions.Builder ib = OFFactories.getFactory(fmb.getVersion()).instructions().buildWriteActions();
    ActionUtils.fromString(tmpFmb, inst, log);
    ib.setActions(tmpFmb.getActions());
    log.debug("Appending WriteActions instruction: {}", ib.build());
    appendInstruction(fmb, ib.build());
    log.debug("All instructions after append: {}", fmb.getInstructions());  }
项目：arscheduler    文件：InstructionUtils.java    
/**
 * Convert the string representation of an OFInstructionWriteActions to
 * an OFInstructionWriteActions. The instruction will be set within the
 * OFFlowMod.Builder provided. Notice nothing is returned, but the
 * side effect is the addition of an instruction in the OFFlowMod.Builder.
 * @param fmb; The FMB in which to append the new instruction
 * @param instStr; The string to parse the instruction from
 * @param log
 */
public static void writeActionsFromString(OFFlowMod.Builder fmb, String inst, Logger log) {

    if (fmb.getVersion().compareTo(OFVersion.OF_11) < 0) {
        log.error("Write Actions Instruction not supported in OpenFlow 1.0");
        return;
    }

    OFFlowMod.Builder tmpFmb = OFFactories.getFactory(fmb.getVersion()).buildFlowModify(); // ActionUtils.fromString() will use setActions(), which should not be used for OF1.3; use temp to avoid overwriting any applyActions data
    OFInstructionWriteActions.Builder ib = OFFactories.getFactory(fmb.getVersion()).instructions().buildWriteActions();
    ActionUtils.fromString(tmpFmb, inst, log);
    ib.setActions(tmpFmb.getActions());
    log.debug("Appending WriteActions instruction: {}", ib.build());
    appendInstruction(fmb, ib.build());
    log.debug("All instructions after append: {}", fmb.getInstructions());  }
项目：floodlight1.2-delay    文件：InstructionUtils.java    
/**
 * Convert the string representation of an OFInstructionWriteActions to
 * an OFInstructionWriteActions. The instruction will be set within the
 * OFFlowMod.Builder provided. Notice nothing is returned, but the
 * side effect is the addition of an instruction in the OFFlowMod.Builder.
 * @param fmb; The FMB in which to append the new instruction
 * @param instStr; The string to parse the instruction from
 * @param log
 */
public static void writeActionsFromString(OFFlowMod.Builder fmb, String inst, Logger log) {

    if (fmb.getVersion().compareTo(OFVersion.OF_11) < 0) {
        log.error("Write Actions Instruction not supported in OpenFlow 1.0");
        return;
    }

    OFFlowMod.Builder tmpFmb = OFFactories.getFactory(fmb.getVersion()).buildFlowModify(); // ActionUtils.fromString() will use setActions(), which should not be used for OF1.3; use temp to avoid overwriting any applyActions data
    OFInstructionWriteActions.Builder ib = OFFactories.getFactory(fmb.getVersion()).instructions().buildWriteActions();
    ActionUtils.fromString(tmpFmb, inst, log);
    ib.setActions(tmpFmb.getActions());
    log.debug("Appending WriteActions instruction: {}", ib.build());
    appendInstruction(fmb, ib.build());
    log.debug("All instructions after append: {}", fmb.getInstructions());  }
项目：floodlight-hardware    文件：InstructionUtils.java    
/**
 * Convert the string representation of an OFInstructionWriteActions to
 * an OFInstructionWriteActions. The instruction will be set within the
 * OFFlowMod.Builder provided. Notice nothing is returned, but the
 * side effect is the addition of an instruction in the OFFlowMod.Builder.
 * @param fmb; The FMB in which to append the new instruction
 * @param instStr; The string to parse the instruction from
 * @param log
 */
public static void writeActionsFromString(OFFlowMod.Builder fmb, String inst, Logger log) {

    if (fmb.getVersion().compareTo(OFVersion.OF_11) < 0) {
        log.error("Write Actions Instruction not supported in OpenFlow 1.0");
        return;
    }

    OFFlowMod.Builder tmpFmb = OFFactories.getFactory(fmb.getVersion()).buildFlowModify(); // ActionUtils.fromString() will use setActions(), which should not be used for OF1.3; use temp to avoid overwriting any applyActions data
    OFInstructionWriteActions.Builder ib = OFFactories.getFactory(fmb.getVersion()).instructions().buildWriteActions();
    ActionUtils.fromString(tmpFmb, inst, log);
    ib.setActions(tmpFmb.getActions());
    log.debug("Appending WriteActions instruction: {}", ib.build());
    appendInstruction(fmb, ib.build());
    log.debug("All instructions after append: {}", fmb.getInstructions());  }
项目：ACAMPController    文件：InstructionUtils.java    
/**
 * Convert the string representation of an OFInstructionWriteActions to
 * an OFInstructionWriteActions. The instruction will be set within the
 * OFFlowMod.Builder provided. Notice nothing is returned, but the
 * side effect is the addition of an instruction in the OFFlowMod.Builder.
 * @param fmb; The FMB in which to append the new instruction
 * @param instStr; The string to parse the instruction from
 * @param log
 */
public static void writeActionsFromString(OFFlowMod.Builder fmb, String inst, Logger log) {

    if (fmb.getVersion().compareTo(OFVersion.OF_11) < 0) {
        log.error("Write Actions Instruction not supported in OpenFlow 1.0");
        return;
    }

    OFFlowMod.Builder tmpFmb = OFFactories.getFactory(fmb.getVersion()).buildFlowModify(); // ActionUtils.fromString() will use setActions(), which should not be used for OF1.3; use temp to avoid overwriting any applyActions data
    OFInstructionWriteActions.Builder ib = OFFactories.getFactory(fmb.getVersion()).instructions().buildWriteActions();
    ActionUtils.fromString(tmpFmb, inst, log);
    ib.setActions(tmpFmb.getActions());
    log.debug("Appending WriteActions instruction: {}", ib.build());
    appendInstruction(fmb, ib.build());
    log.debug("All instructions after append: {}", fmb.getInstructions());  }
项目：fast-failover-demo    文件：InstructionUtils.java    
/**
 * Convert the string representation of an OFInstructionWriteActions to
 * an OFInstructionWriteActions. The instruction will be set within the
 * OFFlowMod.Builder provided. Notice nothing is returned, but the
 * side effect is the addition of an instruction in the OFFlowMod.Builder.
 * @param fmb; The FMB in which to append the new instruction
 * @param instStr; The string to parse the instruction from
 * @param log
 */
public static void writeActionsFromString(OFFlowMod.Builder fmb, String inst, Logger log) {

    if (fmb.getVersion().compareTo(OFVersion.OF_11) < 0) {
        log.error("Write Actions Instruction not supported in OpenFlow 1.0");
        return;
    }

    OFFlowMod.Builder tmpFmb = OFFactories.getFactory(fmb.getVersion()).buildFlowModify(); // ActionUtils.fromString() will use setActions(), which should not be used for OF1.3; use temp to avoid overwriting any applyActions data
    OFInstructionWriteActions.Builder ib = OFFactories.getFactory(fmb.getVersion()).instructions().buildWriteActions();
    ActionUtils.fromString(tmpFmb, inst, log);
    ib.setActions(tmpFmb.getActions());
    log.debug("Appending WriteActions instruction: {}", ib.build());
    appendInstruction(fmb, ib.build());
    log.debug("All instructions after append: {}", fmb.getInstructions());  }
项目：ravikumaran201504    文件：FlowEntryBuilder.java    
private TrafficTreatment buildTreatment() {
    TrafficTreatment.Builder builder = DefaultTrafficTreatment.builder();
    // If this is a drop rule
    if (instructions.size() == 0) {
        builder.drop();
        return builder.build();
    }
    for (OFInstruction in : instructions) {
        switch (in.getType()) {
            case GOTO_TABLE:
                builder.transition(tableType);
                break;
            case WRITE_METADATA:
                break;
            case WRITE_ACTIONS:
                builder.deferred();
                buildActions(((OFInstructionWriteActions) in).getActions(),
                             builder);
                break;
            case APPLY_ACTIONS:
                builder.immediate();
                buildActions(((OFInstructionApplyActions) in).getActions(),
                             builder);
                break;
            case CLEAR_ACTIONS:
                builder.wipeDeferred();
                break;
            case EXPERIMENTER:
                break;
            case METER:
                break;
            default:
                log.warn("Unknown instructions type {}", in.getType());
        }
    }

    return builder.build();
}
项目：floodlightLB    文件：InstructionUtils.java    
/**
 * Convert the string representation of an OFInstructionWriteActions to
 * an OFInstructionWriteActions. The instruction will be set within the
 * OFFlowMod.Builder provided. Notice nothing is returned, but the
 * side effect is the addition of an instruction in the OFFlowMod.Builder.
 * @param fmb; The FMB in which to append the new instruction
 * @param instStr; The string to parse the instruction from
 * @param log
 */
public static void writeActionsFromString(OFFlowMod.Builder fmb, String inst, Logger log) {

    if (fmb.getVersion().compareTo(OFVersion.OF_11) < 0) {
        log.error("Write Actions Instruction not supported in OpenFlow 1.0");
        return;
    }

    OFFlowMod.Builder tmpFmb = OFFactories.getFactory(fmb.getVersion()).buildFlowModify(); // ActionUtils.fromString() will use setActions(), which should not be used for OF1.3; use temp to avoid overwriting any applyActions data
    OFInstructionWriteActions.Builder ib = OFFactories.getFactory(fmb.getVersion()).instructions().buildWriteActions();
    ActionUtils.fromString(tmpFmb, inst, log);
    ib.setActions(tmpFmb.getActions());
    log.debug("Appending WriteActions instruction: {}", ib.build());
    appendInstruction(fmb, ib.build());
    log.debug("All instructions after append: {}", fmb.getInstructions());  }
项目：DSC    文件：InstructionUtils.java    
/**
 * Convert the string representation of an OFInstructionWriteActions to
 * an OFInstructionWriteActions. The instruction will be set within the
 * OFFlowMod.Builder provided. Notice nothing is returned, but the
 * side effect is the addition of an instruction in the OFFlowMod.Builder.
 * @param fmb; The FMB in which to append the new instruction
 * @param instStr; The string to parse the instruction from
 * @param log
 */
public static void writeActionsFromString(OFFlowMod.Builder fmb, String inst, Logger log) {

    if (fmb.getVersion().compareTo(OFVersion.OF_11) < 0) {
        log.error("Write Actions Instruction not supported in OpenFlow 1.0");
        return;
    }

    OFFlowMod.Builder tmpFmb = OFFactories.getFactory(fmb.getVersion()).buildFlowModify(); // ActionUtils.fromString() will use setActions(), which should not be used for OF1.3; use temp to avoid overwriting any applyActions data
    OFInstructionWriteActions.Builder ib = OFFactories.getFactory(fmb.getVersion()).instructions().buildWriteActions();
    ActionUtils.fromString(tmpFmb, inst, log);
    ib.setActions(tmpFmb.getActions());
    log.debug("Appending WriteActions instruction: {}", ib.build());
    appendInstruction(fmb, ib.build());
    log.debug("All instructions after append: {}", fmb.getInstructions());  }
项目：floodlight    文件：InstructionUtils.java    
/**
 * Convert the string representation of an OFInstructionWriteActions to
 * an OFInstructionWriteActions. The instruction will be set within the
 * OFFlowMod.Builder provided. Notice nothing is returned, but the
 * side effect is the addition of an instruction in the OFFlowMod.Builder.
 * @param fmb; The FMB in which to append the new instruction
 * @param instStr; The string to parse the instruction from
 * @param log
 */
public static void writeActionsFromString(OFFlowMod.Builder fmb, String inst, Logger log) {

    if (fmb.getVersion().compareTo(OFVersion.OF_11) < 0) {
        log.error("Write Actions Instruction not supported in OpenFlow 1.0");
        return;
    }

    OFFlowMod.Builder tmpFmb = OFFactories.getFactory(fmb.getVersion()).buildFlowModify(); // ActionUtils.fromString() will use setActions(), which should not be used for OF1.3; use temp to avoid overwriting any applyActions data
    OFInstructionWriteActions.Builder ib = OFFactories.getFactory(fmb.getVersion()).instructions().buildWriteActions();
    ActionUtils.fromString(tmpFmb, inst, log);
    ib.setActions(tmpFmb.getActions());
    log.debug("Appending WriteActions instruction: {}", ib.build());
    appendInstruction(fmb, ib.build());
    log.debug("All instructions after append: {}", fmb.getInstructions());  }
项目：Engine    文件：FlowEntryBuilder.java    
private TrafficTreatment buildTreatment() {
    TrafficTreatment.Builder builder = DefaultTrafficTreatment.builder();
    for (OFInstruction in : instructions) {
        switch (in.getType()) {
            case GOTO_TABLE:
                builder.transition(((int) ((OFInstructionGotoTable) in)
                        .getTableId().getValue()));
                break;
            case WRITE_METADATA:
                OFInstructionWriteMetadata m = (OFInstructionWriteMetadata) in;
                builder.writeMetadata(m.getMetadata().getValue(),
                                      m.getMetadataMask().getValue());
                break;
            case WRITE_ACTIONS:
                builder.deferred();
                buildActions(((OFInstructionWriteActions) in).getActions(),
                             builder);
                break;
            case APPLY_ACTIONS:
                builder.immediate();
                buildActions(((OFInstructionApplyActions) in).getActions(),
                             builder);
                break;
            case CLEAR_ACTIONS:
                builder.wipeDeferred();
                break;
            case EXPERIMENTER:
                break;
            case METER:
                break;
            default:
                log.warn("Unknown instructions type {}", in.getType());
        }
    }

    return builder.build();
}
项目：fresco_floodlight    文件：OFInstructionListSerializer.java    
public static void serializeInstructionList(JsonGenerator jGen, List<OFInstruction> instructions) throws IOException, JsonProcessingException {
jGen.writeObjectFieldStart("instructions");
      if (instructions.isEmpty()) {
          jGen.writeStringField("none", "drop");
      } else {
          for (OFInstruction i : instructions) {
              switch (i.getType()) {
              case CLEAR_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_CLEAR_ACTIONS);
                  break;
              case WRITE_METADATA:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_METADATA);
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA, ((OFInstructionWriteMetadata)i).getMetadata().getValue());
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA + "_mask", ((OFInstructionWriteMetadata)i).getMetadataMask().getValue());
                  break;
              case EXPERIMENTER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_EXPERIMENTER);
                  jGen.writeNumberField(InstructionUtils.STR_EXPERIMENTER, ((OFInstructionExperimenter)i).getExperimenter());
                  break;
              case GOTO_TABLE:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_TABLE);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_TABLE, ((OFInstructionGotoTable)i).getTableId().getValue());
                  break;
              case METER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_METER);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_METER, ((OFInstructionMeter)i).getMeterId());
                  break;
              case APPLY_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_APPLY_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionApplyActions)i).getActions());
                  break;
              case WRITE_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionWriteActions)i).getActions());
              default:
                  // shouldn't ever get here
                  break;
              } // end switch on instruction
              jGen.writeEndObject(); // end specific instruction
          } // end for instructions
      } // end process instructions (OF1.1+ only)
      jGen.writeEndObject(); // end object (either has instructions or a "none":"drop" key:value as specified above)
  }
项目：iTAP-controller    文件：OFInstructionListSerializer.java    
public static void serializeInstructionList(JsonGenerator jGen, List<OFInstruction> instructions) throws IOException, JsonProcessingException {
jGen.writeObjectFieldStart("instructions");
      if (instructions.isEmpty()) {
          jGen.writeStringField("none", "drop");
      } else {
          for (OFInstruction i : instructions) {
              switch (i.getType()) {
              case CLEAR_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_CLEAR_ACTIONS);
                  break;
              case WRITE_METADATA:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_METADATA);
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA, ((OFInstructionWriteMetadata)i).getMetadata().getValue());
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA + "_mask", ((OFInstructionWriteMetadata)i).getMetadataMask().getValue());
                  break;
              case EXPERIMENTER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_EXPERIMENTER);
                  jGen.writeNumberField(InstructionUtils.STR_EXPERIMENTER, ((OFInstructionExperimenter)i).getExperimenter());
                  break;
              case GOTO_TABLE:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_TABLE);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_TABLE, ((OFInstructionGotoTable)i).getTableId().getValue());
                  break;
              case METER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_METER);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_METER, ((OFInstructionMeter)i).getMeterId());
                  break;
              case APPLY_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_APPLY_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionApplyActions)i).getActions());
                  break;
              case WRITE_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionWriteActions)i).getActions());
              default:
                  // shouldn't ever get here
                  break;
              } // end switch on instruction
              jGen.writeEndObject(); // end specific instruction
          } // end for instructions
      } // end process instructions (OF1.1+ only)
      jGen.writeEndObject(); // end object (either has instructions or a "none":"drop" key:value as specified above)
  }
项目：SDN-Multicast    文件：OFInstructionListSerializer.java    
public static void serializeInstructionList(JsonGenerator jGen, List<OFInstruction> instructions) throws IOException, JsonProcessingException {
jGen.writeObjectFieldStart("instructions");
      if (instructions.isEmpty()) {
          jGen.writeStringField("none", "drop");
      } else {
          for (OFInstruction i : instructions) {
              switch (i.getType()) {
              case CLEAR_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_CLEAR_ACTIONS);
                  break;
              case WRITE_METADATA:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_METADATA);
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA, ((OFInstructionWriteMetadata)i).getMetadata().getValue());
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA + "_mask", ((OFInstructionWriteMetadata)i).getMetadataMask().getValue());
                  break;
              case EXPERIMENTER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_EXPERIMENTER);
                  jGen.writeNumberField(InstructionUtils.STR_EXPERIMENTER, ((OFInstructionExperimenter)i).getExperimenter());
                  break;
              case GOTO_TABLE:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_TABLE);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_TABLE, ((OFInstructionGotoTable)i).getTableId().getValue());
                  break;
              case METER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_METER);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_METER, ((OFInstructionMeter)i).getMeterId());
                  break;
              case APPLY_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_APPLY_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionApplyActions)i).getActions());
                  break;
              case WRITE_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionWriteActions)i).getActions());
              default:
                  // shouldn't ever get here
                  break;
              } // end switch on instruction
              jGen.writeEndObject(); // end specific instruction
          } // end for instructions
      } // end process instructions (OF1.1+ only)
      jGen.writeEndObject(); // end object (either has instructions or a "none":"drop" key:value as specified above)
  }
项目：arscheduler    文件：OFInstructionListSerializer.java    
public static void serializeInstructionList(JsonGenerator jGen, List<OFInstruction> instructions) throws IOException, JsonProcessingException {
jGen.writeObjectFieldStart("instructions");
      if (instructions.isEmpty()) {
          jGen.writeStringField("none", "drop");
      } else {
          for (OFInstruction i : instructions) {
              switch (i.getType()) {
              case CLEAR_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_CLEAR_ACTIONS);
                  break;
              case WRITE_METADATA:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_METADATA);
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA, ((OFInstructionWriteMetadata)i).getMetadata().getValue());
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA + "_mask", ((OFInstructionWriteMetadata)i).getMetadataMask().getValue());
                  break;
              case EXPERIMENTER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_EXPERIMENTER);
                  jGen.writeNumberField(InstructionUtils.STR_EXPERIMENTER, ((OFInstructionExperimenter)i).getExperimenter());
                  break;
              case GOTO_TABLE:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_TABLE);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_TABLE, ((OFInstructionGotoTable)i).getTableId().getValue());
                  break;
              case METER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_METER);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_METER, ((OFInstructionMeter)i).getMeterId());
                  break;
              case APPLY_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_APPLY_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionApplyActions)i).getActions());
                  break;
              case WRITE_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionWriteActions)i).getActions());
              default:
                  // shouldn't ever get here
                  break;
              } // end switch on instruction
              jGen.writeEndObject(); // end specific instruction
          } // end for instructions
      } // end process instructions (OF1.1+ only)
      jGen.writeEndObject(); // end object (either has instructions or a "none":"drop" key:value as specified above)
  }
项目：floodlight1.2-delay    文件：OFInstructionListSerializer.java    
public static void serializeInstructionList(JsonGenerator jGen, List<OFInstruction> instructions) throws IOException, JsonProcessingException {
jGen.writeObjectFieldStart("instructions");
      if (instructions.isEmpty()) {
          jGen.writeStringField("none", "drop");
      } else {
          for (OFInstruction i : instructions) {
              switch (i.getType()) {
              case CLEAR_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_CLEAR_ACTIONS);
                  break;
              case WRITE_METADATA:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_METADATA);
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA, ((OFInstructionWriteMetadata)i).getMetadata().getValue());
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA + "_mask", ((OFInstructionWriteMetadata)i).getMetadataMask().getValue());
                  break;
              case EXPERIMENTER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_EXPERIMENTER);
                  jGen.writeNumberField(InstructionUtils.STR_EXPERIMENTER, ((OFInstructionExperimenter)i).getExperimenter());
                  break;
              case GOTO_TABLE:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_TABLE);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_TABLE, ((OFInstructionGotoTable)i).getTableId().getValue());
                  break;
              case METER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_METER);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_METER, ((OFInstructionMeter)i).getMeterId());
                  break;
              case APPLY_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_APPLY_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionApplyActions)i).getActions());
                  break;
              case WRITE_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionWriteActions)i).getActions());
              default:
                  // shouldn't ever get here
                  break;
              } // end switch on instruction
              jGen.writeEndObject(); // end specific instruction
          } // end for instructions
      } // end process instructions (OF1.1+ only)
      jGen.writeEndObject(); // end object (either has instructions or a "none":"drop" key:value as specified above)
  }
项目：floodlight-hardware    文件：OFInstructionListSerializer.java    
public static void serializeInstructionList(JsonGenerator jGen, List<OFInstruction> instructions) throws IOException, JsonProcessingException {
jGen.writeObjectFieldStart("instructions");
      if (instructions.isEmpty()) {
          jGen.writeStringField("none", "drop");
      } else {
          for (OFInstruction i : instructions) {
              switch (i.getType()) {
              case CLEAR_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_CLEAR_ACTIONS);
                  break;
              case WRITE_METADATA:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_METADATA);
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA, ((OFInstructionWriteMetadata)i).getMetadata().getValue());
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA + "_mask", ((OFInstructionWriteMetadata)i).getMetadataMask().getValue());
                  break;
              case EXPERIMENTER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_EXPERIMENTER);
                  jGen.writeNumberField(InstructionUtils.STR_EXPERIMENTER, ((OFInstructionExperimenter)i).getExperimenter());
                  break;
              case GOTO_TABLE:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_TABLE);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_TABLE, ((OFInstructionGotoTable)i).getTableId().getValue());
                  break;
              case METER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_METER);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_METER, ((OFInstructionMeter)i).getMeterId());
                  break;
              case APPLY_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_APPLY_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionApplyActions)i).getActions());
                  break;
              case WRITE_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionWriteActions)i).getActions());
              default:
                  // shouldn't ever get here
                  break;
              } // end switch on instruction
              jGen.writeEndObject(); // end specific instruction
          } // end for instructions
      } // end process instructions (OF1.1+ only)
      jGen.writeEndObject(); // end object (either has instructions or a "none":"drop" key:value as specified above)
  }
项目：ACAMPController    文件：OFInstructionListSerializer.java    
public static void serializeInstructionList(JsonGenerator jGen, List<OFInstruction> instructions) throws IOException, JsonProcessingException {
jGen.writeObjectFieldStart("instructions");
      if (instructions.isEmpty()) {
          jGen.writeStringField("none", "drop");
      } else {
          for (OFInstruction i : instructions) {
              switch (i.getType()) {
              case CLEAR_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_CLEAR_ACTIONS);
                  break;
              case WRITE_METADATA:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_METADATA);
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA, ((OFInstructionWriteMetadata)i).getMetadata().getValue());
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA + "_mask", ((OFInstructionWriteMetadata)i).getMetadataMask().getValue());
                  break;
              case EXPERIMENTER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_EXPERIMENTER);
                  jGen.writeNumberField(InstructionUtils.STR_EXPERIMENTER, ((OFInstructionExperimenter)i).getExperimenter());
                  break;
              case GOTO_TABLE:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_TABLE);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_TABLE, ((OFInstructionGotoTable)i).getTableId().getValue());
                  break;
              case METER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_METER);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_METER, ((OFInstructionMeter)i).getMeterId());
                  break;
              case APPLY_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_APPLY_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionApplyActions)i).getActions());
                  break;
              case WRITE_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionWriteActions)i).getActions());
              default:
                  // shouldn't ever get here
                  break;
              } // end switch on instruction
              jGen.writeEndObject(); // end specific instruction
          } // end for instructions
      } // end process instructions (OF1.1+ only)
      jGen.writeEndObject(); // end object (either has instructions or a "none":"drop" key:value as specified above)
  }
项目：fast-failover-demo    文件：OFInstructionListSerializer.java    
public static void serializeInstructionList(JsonGenerator jGen, List<OFInstruction> instructions) throws IOException, JsonProcessingException {
jGen.writeObjectFieldStart("instructions");
      if (instructions.isEmpty()) {
          jGen.writeStringField("none", "drop");
      } else {
          for (OFInstruction i : instructions) {
              switch (i.getType()) {
              case CLEAR_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_CLEAR_ACTIONS);
                  break;
              case WRITE_METADATA:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_METADATA);
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA, ((OFInstructionWriteMetadata)i).getMetadata().getValue());
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA + "_mask", ((OFInstructionWriteMetadata)i).getMetadataMask().getValue());
                  break;
              case EXPERIMENTER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_EXPERIMENTER);
                  jGen.writeNumberField(InstructionUtils.STR_EXPERIMENTER, ((OFInstructionExperimenter)i).getExperimenter());
                  break;
              case GOTO_TABLE:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_TABLE);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_TABLE, ((OFInstructionGotoTable)i).getTableId().getValue());
                  break;
              case METER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_METER);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_METER, ((OFInstructionMeter)i).getMeterId());
                  break;
              case APPLY_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_APPLY_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionApplyActions)i).getActions());
                  break;
              case WRITE_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionWriteActions)i).getActions());
              default:
                  // shouldn't ever get here
                  break;
              } // end switch on instruction
              jGen.writeEndObject(); // end specific instruction
          } // end for instructions
      } // end process instructions (OF1.1+ only)
      jGen.writeEndObject(); // end object (either has instructions or a "none":"drop" key:value as specified above)
  }
项目：floodlightLB    文件：OFInstructionListSerializer.java    
public static void serializeInstructionList(JsonGenerator jGen, List<OFInstruction> instructions) throws IOException, JsonProcessingException {
jGen.writeObjectFieldStart("instructions");
      if (instructions.isEmpty()) {
          jGen.writeStringField("none", "drop");
      } else {
          for (OFInstruction i : instructions) {
              switch (i.getType()) {
              case CLEAR_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_CLEAR_ACTIONS);
                  break;
              case WRITE_METADATA:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_METADATA);
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA, ((OFInstructionWriteMetadata)i).getMetadata().getValue());
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA + "_mask", ((OFInstructionWriteMetadata)i).getMetadataMask().getValue());
                  break;
              case EXPERIMENTER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_EXPERIMENTER);
                  jGen.writeNumberField(InstructionUtils.STR_EXPERIMENTER, ((OFInstructionExperimenter)i).getExperimenter());
                  break;
              case GOTO_TABLE:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_TABLE);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_TABLE, ((OFInstructionGotoTable)i).getTableId().getValue());
                  break;
              case METER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_METER);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_METER, ((OFInstructionMeter)i).getMeterId());
                  break;
              case APPLY_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_APPLY_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionApplyActions)i).getActions());
                  break;
              case WRITE_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionWriteActions)i).getActions());
              default:
                  // shouldn't ever get here
                  break;
              } // end switch on instruction
              jGen.writeEndObject(); // end specific instruction
          } // end for instructions
      } // end process instructions (OF1.1+ only)
      jGen.writeEndObject(); // end object (either has instructions or a "none":"drop" key:value as specified above)
  }
项目：DSC    文件：OFInstructionListSerializer.java    
public static void serializeInstructionList(JsonGenerator jGen, List<OFInstruction> instructions) throws IOException, JsonProcessingException {
jGen.writeObjectFieldStart("instructions");
      if (instructions.isEmpty()) {
          jGen.writeStringField("none", "drop");
      } else {
          for (OFInstruction i : instructions) {
              switch (i.getType()) {
              case CLEAR_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_CLEAR_ACTIONS);
                  break;
              case WRITE_METADATA:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_METADATA);
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA, ((OFInstructionWriteMetadata)i).getMetadata().getValue());
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA + "_mask", ((OFInstructionWriteMetadata)i).getMetadataMask().getValue());
                  break;
              case EXPERIMENTER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_EXPERIMENTER);
                  jGen.writeNumberField(InstructionUtils.STR_EXPERIMENTER, ((OFInstructionExperimenter)i).getExperimenter());
                  break;
              case GOTO_TABLE:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_TABLE);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_TABLE, ((OFInstructionGotoTable)i).getTableId().getValue());
                  break;
              case METER:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_GOTO_METER);
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_METER, ((OFInstructionMeter)i).getMeterId());
                  break;
              case APPLY_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_APPLY_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionApplyActions)i).getActions());
                  break;
              case WRITE_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionWriteActions)i).getActions());
              default:
                  // shouldn't ever get here
                  break;
              } // end switch on instruction
              jGen.writeEndObject(); // end specific instruction
          } // end for instructions
      } // end process instructions (OF1.1+ only)
      jGen.writeEndObject(); // end object (either has instructions or a "none":"drop" key:value as specified above)
  }
项目：floodlight    文件：OFInstructionListSerializer.java    
public static void serializeInstructionList(JsonGenerator jGen, List<OFInstruction> instructions) throws IOException, JsonProcessingException {
jGen.writeObjectFieldStart("instructions");
      if (instructions.isEmpty()) {
          jGen.writeStringField("none", "drop");
      } else {
          for (OFInstruction i : instructions) {
              switch (i.getType()) {
              case CLEAR_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_CLEAR_ACTIONS);
                  break;
              case WRITE_METADATA:
                  jGen.writeStartObject();
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA, ((OFInstructionWriteMetadata)i).getMetadata().getValue());
                  jGen.writeNumberField(InstructionUtils.STR_WRITE_METADATA + "_mask", ((OFInstructionWriteMetadata)i).getMetadataMask().getValue());
                  break;
              case EXPERIMENTER:
                  jGen.writeStartObject();
                  jGen.writeNumberField(InstructionUtils.STR_EXPERIMENTER, ((OFInstructionExperimenter)i).getExperimenter());
                  break;
              case GOTO_TABLE:
                  jGen.writeStartObject();
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_TABLE, ((OFInstructionGotoTable)i).getTableId().getValue());
                  break;
              case METER:
                  jGen.writeStartObject();
                  jGen.writeNumberField(InstructionUtils.STR_GOTO_METER, ((OFInstructionMeter)i).getMeterId());
                  break;
              case APPLY_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_APPLY_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionApplyActions)i).getActions());
                  break;
              case WRITE_ACTIONS:
                  jGen.writeObjectFieldStart(InstructionUtils.STR_WRITE_ACTIONS);
                  OFActionListSerializer.serializeActions(jGen, ((OFInstructionWriteActions)i).getActions());
              default:
                  // shouldn't ever get here
                  break;
              } // end switch on instruction
              jGen.writeEndObject(); // end specific instruction
          } // end for instructions
          jGen.writeEndObject();
      } // end process instructions (OF1.1+ only)
  }
项目：onos    文件：FlowEntryBuilder.java    
private TrafficTreatment buildTreatment() {
    TrafficTreatment.Builder builder = DefaultTrafficTreatment.builder();
    for (OFInstruction in : instructions) {
        switch (in.getType()) {
            case GOTO_TABLE:
                builder.transition(((int) ((OFInstructionGotoTable) in)
                        .getTableId().getValue()));
                break;
            case WRITE_METADATA:
                OFInstructionWriteMetadata m = (OFInstructionWriteMetadata) in;
                builder.writeMetadata(m.getMetadata().getValue(),
                                      m.getMetadataMask().getValue());
                break;
            case WRITE_ACTIONS:
                builder.deferred();
                buildActions(((OFInstructionWriteActions) in).getActions(),
                             builder);
                break;
            case APPLY_ACTIONS:
                builder.immediate();
                buildActions(((OFInstructionApplyActions) in).getActions(),
                             builder);
                break;
            case CLEAR_ACTIONS:
                builder.wipeDeferred();
                break;
            case STAT_TRIGGER:
                OFInstructionStatTrigger statTrigger = (OFInstructionStatTrigger) in;
                buildStatTrigger(statTrigger.getThresholds(), statTrigger.getFlags(), builder);
                break;
            case EXPERIMENTER:
                break;
            case METER:
                break;
            default:
                log.warn("Unknown instructions type {}", in.getType());
        }
    }

    return builder.build();
}
项目：fresco_floodlight    文件：InstructionUtils.java    
/**
 * Convert an OFInstructionWriteActions to string form. The string will be formatted
 * in a dpctl/ofctl-style syntax.
 * @param inst; The instruction to convert to a string
 * @param log
 * @return
 */
public static String writeActionsToString(OFInstructionWriteActions inst, Logger log) throws Exception {
    return ActionUtils.actionsToString(inst.getActions(), log);
}
项目：iTAP-controller    文件：InstructionUtils.java    
/**
 * Convert an OFInstructionWriteActions to string form. The string will be formatted
 * in a dpctl/ofctl-style syntax.
 * @param inst; The instruction to convert to a string
 * @param log
 * @return
 */
public static String writeActionsToString(OFInstructionWriteActions inst, Logger log) throws Exception {
    return ActionUtils.actionsToString(inst.getActions(), log);
}
项目：SDN-Multicast    文件：InstructionUtils.java    
/**
 * Convert an OFInstructionWriteActions to string form. The string will be formatted
 * in a dpctl/ofctl-style syntax.
 * @param inst; The instruction to convert to a string
 * @param log
 * @return
 */
public static String writeActionsToString(OFInstructionWriteActions inst, Logger log) throws Exception {
    return ActionUtils.actionsToString(inst.getActions(), log);
}
项目：arscheduler    文件：InstructionUtils.java    
/**
 * Convert an OFInstructionWriteActions to string form. The string will be formatted
 * in a dpctl/ofctl-style syntax.
 * @param inst; The instruction to convert to a string
 * @param log
 * @return
 */
public static String writeActionsToString(OFInstructionWriteActions inst, Logger log) throws Exception {
    return ActionUtils.actionsToString(inst.getActions(), log);
}
项目：floodlight1.2-delay    文件：InstructionUtils.java    
/**
 * Convert an OFInstructionWriteActions to string form. The string will be formatted
 * in a dpctl/ofctl-style syntax.
 * @param inst; The instruction to convert to a string
 * @param log
 * @return
 */
public static String writeActionsToString(OFInstructionWriteActions inst, Logger log) throws Exception {
    return ActionUtils.actionsToString(inst.getActions(), log);
}
项目：floodlight-hardware    文件：InstructionUtils.java    
/**
 * Convert an OFInstructionWriteActions to string form. The string will be formatted
 * in a dpctl/ofctl-style syntax.
 * @param inst; The instruction to convert to a string
 * @param log
 * @return
 */
public static String writeActionsToString(OFInstructionWriteActions inst, Logger log) throws Exception {
    return ActionUtils.actionsToString(inst.getActions(), log);
}
项目：ACAMPController    文件：InstructionUtils.java    
/**
 * Convert an OFInstructionWriteActions to string form. The string will be formatted
 * in a dpctl/ofctl-style syntax.
 * @param inst; The instruction to convert to a string
 * @param log
 * @return
 */
public static String writeActionsToString(OFInstructionWriteActions inst, Logger log) throws Exception {
    return ActionUtils.actionsToString(inst.getActions(), log);
}
项目：fast-failover-demo    文件：InstructionUtils.java    
/**
 * Convert an OFInstructionWriteActions to string form. The string will be formatted
 * in a dpctl/ofctl-style syntax.
 * @param inst; The instruction to convert to a string
 * @param log
 * @return
 */
public static String writeActionsToString(OFInstructionWriteActions inst, Logger log) throws Exception {
    return ActionUtils.actionsToString(inst.getActions(), log);
}
项目：floodlightLB    文件：InstructionUtils.java    
/**
 * Convert an OFInstructionWriteActions to string form. The string will be formatted
 * in a dpctl/ofctl-style syntax.
 * @param inst; The instruction to convert to a string
 * @param log
 * @return
 */
public static String writeActionsToString(OFInstructionWriteActions inst, Logger log) throws Exception {
    return ActionUtils.actionsToString(inst.getActions(), log);
}
项目：DSC    文件：InstructionUtils.java    
/**
 * Convert an OFInstructionWriteActions to string form. The string will be formatted
 * in a dpctl/ofctl-style syntax.
 * @param inst; The instruction to convert to a string
 * @param log
 * @return
 */
public static String writeActionsToString(OFInstructionWriteActions inst, Logger log) throws Exception {
    return ActionUtils.actionsToString(inst.getActions(), log);
}
项目：floodlight    文件：InstructionUtils.java    
/**
 * Convert an OFInstructionWriteActions to string form. The string will be formatted
 * in a dpctl/ofctl-style syntax.
 * @param inst; The instruction to convert to a string
 * @param log
 * @return
 */
public static String writeActionsToString(OFInstructionWriteActions inst, Logger log) throws Exception {
    return ActionUtils.actionsToString(inst.getActions(), log);
}